Replacing Vinyl Siding

Some Tips

  • Just to warn you guys ,these unlocking tools will mark up your siding when you are trying to jam it into the the lock chanel , the metal rubs off and makes marks on the siding , next time i use it i will be sure to place a piece of thin cardboard behind it like the thickness of a match book or foldable clothing gift box type cardboard , the marks the metal leaves will come off for the most part but not too easily
  • we had to take the bottom part of the siding on our house to lift it and straps it. now we are been told that we need to take the full siding of the house to be able to add the part that was taken out in the bottom. is there a way to ad the siding that was taken out to the house without taken the whole house siding of?.hi see it! it may be difficult but it can be done, you may need to install it top to bottom instead. You can do it!

Flat roof vs Pitched roof – Which one is the best for your home?

Today there are several roofing alternatives available when constructing or repairing the roof on your shed or home. Pitched roofs come in different styles including mansard, hipped, or gabled; whereas flat roofs are built using designs like as built-up or single-ply.

Regardless of the type you would like to see on your home, flat and pitched roofs offer different benefits and drawbacks. You should always speak to a professional roofing contractor to determine the best option for your home with regards to maintenance, cost, and structure.

Maintaining

All roofs need regular maintenance to ensure they protect your home and belongings. Most of the systems will be protected by a lengthy warranty, sometimes up to 20 years, regardless of the type. Nevertheless, when it comes to maintenance, flat roofs can be easier to clean, inspect and repair.

Pitched roofs on the other hand, because of the slope, they are more difficult to work on, but usually require less frequent maintenance. Obviously, flat roofs offer inferior drainage compared to pitched and without regular maintenance and inspection drains and gutters can be clogged and will ultimately damage your roof. Moreover, flat roofs require a waterproof seal which must undergo regular maintenance to avoid damage and leaks. Indeed, leaks on flat roofs are almost always a result of poor inspection and maintenance.

By the way, while speaking about roof sealing, the average cost to seal a roof is $829 (national average) and the typical cost range is $334 – $1,348 (source: http://www.homeadvisor.com/cost/roofing/seal-a-roof/)

Cost

Most contractors will tell you that a flat roof is considerably cheaper than a pitched. Nevertheless, the savings on construction may or may not make up for the longer-term maintenance costs. As such, homeowners living in the wettest climates should consider pitched roofs even though initial costs are high. This kind of roofs protect well against inclement weather and are much less susceptible to moisture damage.

Structure

Finally, structure is an important consideration to make when you are deciding between flat roof vs pitched roof. Pitched roofs offer excellent structure, stability, and drainage and are usually the go-to roof for homes in wet climates. Alternatively, flat roofs system can provide an attractive design element while also being less expensive. Many homeowners prefer the contemporary design of flat roofs, and even if you live in a rainy climate, there are still excellent designs.

Pitched roof is much better than the flat roof in cases where water evacuation is much needed for houses and building that are located in an area that is affected by rain. This is not to say that flat roofs are of a disadvantage however as they can be much easier to install, at a low cost, with lower maintenance needs.

Ultimately, whether you choose the type of roof, it is important to make an informed decision. Climate will have important implications with regards to the maintenance, cost, and structure so you should be careful to choose a roof that not only fits your budget but your needs. Flat roofs make an excellent choice for dry climates, while pitched roofs are the obvious favorite in wet climates because of their superior drainage. Still, style will also factor into your decision, so if you have your heart set on a particular type, speak to a professional contractor about how to choose right product and type.

Considerations To Insulate A Low-Sloped Metal Roof 

metal roof

Low-sloped roofs are always dangerous to work on. When it comes to the insulation of a low-sloped metal roof, then the things get a bit different from that of regular roofs. The low-sloped roofs appear inaccessible and daunting to work on. Hence, proper safety precautions must be taken while insulating a low-sloped metal roof.

To accomplish the task on hand, collect the required roofing tools and supplies. The uniqueness of the job calls for the involvement of expertise along with certain specialized equipment. Besides these, arrange for the basic tools and roof climbing equipment.

A spray-foam insulation kit available in the market can do the required job for you. The package consists of hand-held sprayer equipment and closed-cell liquefied foam.

While the liquefied foam is sprayed on the wide area of the roof structure, the sprayer equipment ensures the even layering of liquid foam. Also, the narrow beam of spray converging out of the mouth of the sprayer can be easily injected into the roof through a small hole. Make sure that the purchased package consists of the user manual, warranty card and the receipt of the bill along with the standard components.

If however you have located the plywood board in your roof architecture then move ahead with the proceedings. Insert mouth of the sprayer into the hole and inject the foam into the base of the metal roof.

Insulation is the most indispensable element in increasing energy efficiency in buildings. Insulation is the prime factor to minimize the electricity bills and can be implemented to any part of the house such as roof, attic, floors and walls.

However, it is essential to understand the form of insulation that would suit a building the best. This gives the best results. The efficiency of the insulating materials is measured by a parameter known as, ‘R-value.’ The ‘R-value’ of material is defined as its level of resistance to heat flow. ‘R value’ is defined as the thermal efficiency of an insulation product.

There are two ways of insulating a roof. They are ‘Batts’ insulation and ‘blown-in’ insulation. Each one has a different benefit. ‘Batts’ are nothing but pieces that are cut-in standard sizes. Batts are noncombustible and durable. They are resistant to aging, humidity, rust, and corrosion. On the other hand, ‘blown-in’ insulation is spraying a loose material into the roof space.

There are several varieties of Batts. Glass wool, polyester, and rock wool are the various batts available in the market. Rock wool is the best thermal-acoustic roofing insulation product. Polyester is the next best roofing insulation product. Glass wool is advantageous for thermal roofing but not suitable for acoustic roofing. Roof insulation keeps building cooler in summer and warmer in winter.

There are several benefits of insulating the roof of a building. Insulating the roof can control the level of noise produced in premises. Roof insulation can minimize the heat by approximately thirteen percentages. Also it can help individuals save money. Moreover it can prevent greenhouse gas emissions. A professionally insulated roof can keep a building cool during hotter climates. It creates a healthier environment thereby preventing people from diseases like allergies and asthma.

Roof insulation can be done through various roof contractor companies. There are several professional insulation companies that insulate a house at an affordable price. It is cost-effective and efficient. Keeping premises noise-free, pollution-free and sound-free makes it lovable to reside. Insulation provides the best way of creating an environmentally friendly building. Another great advantage of roof insulation is that it helps in the reduction of energy bills.

Advantages and Disadvantages of Fiber Cement Siding

Whether you’re building a home from the ground up or choosing to make upgrades to your existing one, you’ve probably given some thought to the type of house siding that you’ll use.

Smart homeowners are choosing to use fiber cement siding for a good reason. If you’re looking to arm yourself with the information necessary to make the decision on the right type of materials to use, then read below about the pros and cons of fiber cement siding as an option for your new home.

What Is Fiber Cement House Siding?

Fiber cement is an altogether different material than vinyl. Despite the fact that vinyl has been utilized for quite a long time, many siding contractors are finding there’s a better option.

Fiber cement is a heavy, hardy substance that’s made out of sand, cement and cellulose fibers. It is gaining in popularity because it’s non-combustible, rot resistant, impervious to termites and highly durable against minor bumps and scratches. It also has a real wood grain feel and look and can be painted quite easily.

This siding choice is typically more versatile than vinyl or wood alternatives, due to its durability. Fiber cement siding is mar-resistant and peeling, chipping, or cracking is not as common as it is with vinyl siding.

Advantages of fiber cement siding

Fiber cement is naturally resistant to fungus, mildew, and termites, so there is no routine maintenance required to prevent these problems as with wood siding.

Also, it stands up to temperature fluctuations and humidity much better. It is due to both the material used and the actual structure of the product. It is much thicker and much more durable than its vinyl counterpart.

Fiber cement siding is flame-resistant as well. It is non-combustible and approved for fire-rated construction.

It is available in a wide variety of colors and styles, such as horizontal, vertical, and shingle-style. It can be found with different patterns as well, such as wood grain or stucco, and is offered as a soffit material as well.

Fiber cement siding can also be easily painted, should you feel the need for a change. The same cannot be accomplished with vinyl, as the paint will peel and crack from sun and weather exposure in a relatively short period.

Disadvantages of fiber cement siding

Cost

The main disadvantage is cost. This material requires long planning, huge labor force and long duration of time to install. That is why it is much more costly than vinyl siding; almost 3 times. People usually have no other choice than to go for a much cheaper alternative like vinyl siding.

Maintenance

Even if the main siding has a warranty of 50 years, the upper finish does not last that long. For example, the paint needs to be done again every 10 to 15 years. This adds to its overall cost.

Installation

Another problem is that installation contractors are hard to find for fiber cement siding. Most of the siding contractors are proficient in doing vinyl siding and only few dare to deal with fiber cement siding.

Manufacturers, however, are highly promoting it, and due to its various beneficial features, it is expected to dominate the market in the future.